Photos, descriptions and specs are for general reference and may vary- They may not depict actual Rental unit.

Power w/Dies & Stand, 1/2"-4"

* "Rent Now" is not a reservation or a guarantee of availability. An Associate will contact you once your request has been submitted. Equipment Makes & Models shown may vary from the actual Rental unit you receive.

Wheeler Rex 6790


Wheeler Rex 6790 1/4" to 4" Threading Machine
The Wheeler Rex 6790 1/4" to 4" Threading Machine features a self-opening die head, with through die head oiling. Ultimate accuracy with quick changes between pipe sizes, producing quality threads. The 6790 offers adjustable thread length, three-stage oil filtration system, and a sturdy three flute reamer that covers the entire 1/2" to 4" range. The 6790 is a three speed machine that is powered by a durable condenser motor, with an extremely low noise level. Completely equipped to cut, thread, and ream.


Wheeler Rex 6790 1/4" to 4" Threading Machine Features:
For 1/2" to 4" pipe, 110V/120V or 220V/230V, single phase 1KW condenser motor, average noise level: 72db, maximum amperage under load: 18.5 no load RPM: 15/27/48.
Wheeler Rex 6790 1/4" to 4" Threading Machine Includes:
Two die heads: 1/2" to 2" and 2-1/2" to 4", three sets of NPT dies: 1/2" to 3/4", 1" to 2" and 2-1/2" to 4", spare cutter wheel, foot switch, 4-leg stand, and built-in tool tray.
For additional information on this product please call us at 877-289-7368

Rigid 1822-1


Model 1822-I  
Heavy Duty Automatic Chucking. Threads a wide range of material including black and galvanized pipe, stainless steel, IMC, PVC and heavy-wall conduit.
Induction motor (81 db) delivers constant 45 or 16 RPM as required.
Constant and proper lubrication of dies and workpiece with through-head oiling.
Triple filtration provides for longer oil pump life and clean threads.
Special jaw inserts allow for quick, easy replacement.


Pipe Capacity:
1/8"-2" (3mm-50mm) 2 1/2"-4" (62mm-100mm) with No. 141 geared threader.
Bolt Capacity:
Bolt: 1/4"-2" (6mm-50mm).
Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction.
Motor Control: Open/Off/Close, heavy-duty rotary type switch and integral safety foot switch.
Spindle Speed: 45 and 16 RPM, right-hand, can be adapted to left-hand operation.
Transmission: Two-speed (45 RPM for up to 1 1/4" pipe and 1" bolt, 16 RPM for low voltage and higher torque applications).
Front Chuck: Automatic gripping/centering.
Rear Centering Device: Automatic, centering only.
Cutter: Model 364, 1/8"-2" full-floating, self-centering with E-1032 Cutter Wheel.
Reamer: Model 344, 1/8"-2" right-hand only.
Clutch: Shiftable cone type.
Oil Pump:: Self-priming gerotor.